Rock saw machine notes - Huaqiang Electronic Network

Rock Saw Machine - Safety and Operating Guidelines

1. When the cutting blade reaches the end of its travel, ensure that it is fully separated from the workpiece before disconnecting it from the machine and Pump. After that, open the sealing door to safely remove the workpiece.

2. Diamond tools are expensive and sensitive. Avoid any impacts during the clamping process to prevent blade deformation, which could affect cutting performance and accuracy.

3. During normal operation, avoid sudden adjustments in feed rate, as this can cause damage to the blade and other components of the machine.

4. If the machine makes any unusual noises during cutting, stop immediately and inspect the system to identify and resolve the issue before continuing.

5. Always monitor the coolant flow to ensure sufficient cooling. Insufficient coolant can lead to increased blade wear and reduce the lifespan of the cutting tool.

6. Regularly check for leaks in the system and install leak protection devices to ensure a safe working environment and prevent potential hazards.

7. Maintain proper maintenance schedules to keep the rock saw machine in optimal condition. This includes checking all moving parts, lubricating where necessary, and replacing worn components promptly.

8. Ensure that operators are properly trained and familiar with the machine’s functions and safety protocols before use. This helps prevent accidents and ensures efficient operation.

9. Always use the correct blade type and size for the specific material being cut. Using an inappropriate blade may result in poor performance or damage to both the blade and the workpiece.

10. Keep the work area clean and free of debris to avoid interference with the cutting process and to maintain a safe environment for operators.