Children are not only the future of the motherland, but also the parents' hearts and minds. At home, most of the children's activities are the bedroom and the study. In order to create a safe, quiet and comfortable environment for children, the selection of lamps is crucial.
For the bedroom, these 6 lights can not be ignored
1, choose adjustable lamps
When choosing a children's room luminaire for your child, it is best to choose a luminaire that can adjust the brightness or angle. We can dim the light at night to help the child fall asleep as soon as possible; after the child falls asleep, remember to turn off the light.
2, the lampshade should cover the light bulb
The shade of the children's room room is lightly colored, and it is best to cover the light bulb in order to prevent the child from touching the light bulb. On the one hand, the high heat of the bulb can burn the child; on the other hand, the grease on the finger of the child will allow the dust to adhere to the bulb, reduce the service life of the bulb, and may even cause the bulb to explode, which is not good.
3, lighting design
Although the light on the head of the children's bed can give more light to the bed, the child's vision is very fragile and cannot withstand direct sunlight for a long time. Moreover, close-range lamp magnetic radiation has many adverse effects on children's brain development. The best way to install it is to make sure your child is lying on the pillow and can't see the lamp.
4, the wall lamp wire must be in the wall
The child's nature is lively, active, and full of curiosity about things around, but their lack of self-protection awareness. Therefore, if a wall lamp is installed in a children's room, then you must pay attention to not letting the power cord be exposed. The children in the province take the wires and play with the toys, which is not a joke.
5, the socket must have a cover
Children also like to climb everywhere, so we must pay attention to whether the power outlet in the children's room is safe. Ordinary power outlets are not covered. For the safety of children, we have to choose a socket with a safety cover or a socket that can be automatically closed by unplugging the power hole.
6, install multiple sockets
The children's room is the most self-contained space for children at home. Whether it is learning, playing, or playing with friends, it is mostly done in this free little world. Therefore, the lighting in the room is more than that in the adult room; electrical appliances such as computers, air conditioners, and televisions need to be installed with more sockets during the renovation to avoid overloading the electrical equipment at a single power point because of insufficient sockets.
Lamps for the study
1, the color of the lamp
The first impression of things is the color. In general, it is not advisable to use too bright, white lights in the study. First, because it follows the dark truth of the hall, the second is that the light will increase the burden on the child's eyes, which is very likely to cause visual fatigue. Therefore, in the study, you should choose light yellow light as the main light. Then use a slightly brighter eye-protection table lamp on the desk for your child to learn. This will not only save energy, but also help your child's eye health.
APM 40V DC Power Supply is usually used in testing cable or circuit breaker filed. To protect user`s device and the Laboratory Power Supply itself, protection functions of OVP,OCP,OPP etc. could be started according to the requirement.SCP function defaults to ON.
48vdc Power Supply provides built-in standard automobile electrical testing curves,users can select any built-in curve to do the DUT performance test directly according to their demand.
Some features of the power supply as below:
- Ultrafast respond time and high efficiency
- Accurate voltage and current measurement capability
- Constant Power and wide range of voltage and current output
- Equips with LIST waveform editing function
- Master/Slave parallel and series operation mode for up to 10 units
- Voltage drop compensation by remote sense line.
- Compliant with SCPI communication protocol
- Support RS232/RS485/LAN/USB (standard) ,GPIB (optional)
- Have obtained CE,UL,CSA,FCC.ROHS
40V DC Power Supply
40V DC Power Supply,Rack Mount DC Power Supply,Lab Power Supply,Pc Power Supply
APM Technologies (Dongguan) Co., Ltd , https://www.apmpowersupply.com