The secret of the inverter damage motor

The emergence of frequency converters has brought innovation to industrial automation control and motor energy saving. In industrial production, the inverter is almost inseparable. Even in daily life, elevators and inverter air conditioners have become indispensable parts. The inverters have begun to penetrate into all corners of production and life. However, the frequency converter has also brought many unprecedented problems, and the damage motor is one of the most typical phenomena.

Many people have already discovered the damage of the inverter to the motor. For example, in a water pump factory, in the past two years, his users frequently reported that the pump was damaged during the warranty period. In the past, the quality of this pump factory was very reliable. After investigation, it was found that these damaged pumps were driven by inverters.

Although the phenomenon that the inverter damages the motor is getting more and more attention, people are still unclear about the mechanism that causes this phenomenon, and they do not know how to prevent it. The purpose of this article is to address these confusions.

Inverter damage to the motor

The damage of the inverter to the motor includes two aspects, the damage of the stator winding and the damage of the bearing, as shown in Figure 1. This kind of damage generally occurs in a few weeks to ten months, the specific time and the brand of the inverter, the brand of the motor, the power of the motor, the carrier frequency of the inverter, the cable length between the inverter and the motor, the ambient temperature, etc. Many factors are related. The early accidental damage of the motor brings huge economic losses to the production of the enterprise. This loss is not only the cost of motor repair and replacement, but also the economic loss caused by accidental shutdown. Therefore, when using a frequency converter to drive a motor, it is necessary to pay sufficient attention to the problem of motor damage.

Portable Power Station

A portable power station is the best option if you need to juice up common personal electronics and small appliances while spending long periods of time away from household AC outlets, or if you want to have backup power ready to go in case of an emergency.



They have enough capacity to power a few small appliances for a short time. With a host of different outlets (standard 120v outlets, USB ports, and DC chargers), you can use the station to charge electronics, too. And the units often come with portable solar panels, to add more charging capabilities and extend runtime.



UPGRADED 250-WATT POWERFUL AC, USB AND 12V OUTPUTS: Comparing to similar Battery powered generators, Rockpals RP250W portable generator has upgraded the AC output to 250W continuous (300W surge max) dual AC outputs, built-in 2x USB 2.1A and 4x DC 12V ( 60W ) ports. Perfect emergency backup power for home/ travel/ camping, charging up your tablets, iPhone, iPad, laptops, fans, TV, lights and CPAP machine (*Use DC converter from your CPAP would get longer hours)

Portable Power Station,Portable power, Off-grid Power Supply, Portable Generator, Backup Camping Emergency,Backup Lithium Battery for Outdoor

Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com

This entry was posted in on