LED lights have become the new darling of consumers because of their energy-saving and power-saving features. However, buying LED lights can not be blind. On August 21st, the Guangdong Provincial Bureau of Quality and Technical Supervision released the results of a provincial-level special supervision and inspection of self-ballasted LED lamp products in Guangdong Province. The results showed that the pass rate of self-ballasted LED lamp products in Guangdong Province was less than 30%. The Provincial Bureau of Quality and Technical Supervision reminds consumers to pay attention to the product identification when purchasing LED lights.
The Bureau reminds consumers that when buying LED lights, you must check the product's logo. The specification of the product packaging usually describes the luminous flux, beam angle, lifetime, color temperature, and correct installation position of the LED lamp. After opening the package, there must be some necessary signs on the self-ballasted LED lights themselves, mainly including: power supply voltage, frequency, rated power, name and trademark of the manufacturer. Also check whether there is a “CQC†or “Energy Conservation Certification†logo on the packaging. If the company obtains the “CQC†or “Energy Conservation Certification†logo, it proves that the company's product quality is one level higher than that of the generally qualified product.
It is reported that the Guangdong Provincial Bureau of Quality and Technical Supervision announced on August 21 the results of special provincial supervision and inspection of self-ballasted LED lamp product quality. The discovery rate of substandard products was 73.9%.
A total of 23 batches of self-ballasted LED lamp products produced by 21 companies in 7 cities including Guangzhou, Shenzhen, Zhuhai, Foshan, Zhongshan, Huizhou and Dongguan were investigated. According to GB24906-2010, 50V or more for ordinary lighting Safety Requirements for Flow LED Lamps, GB/T24908-2010 Performance Requirements for Self-ballasted LED Lamps for General Lighting, and GB17625.1-2003 Electromagnetic Compatibility Limits and Harmonic Current Emission Limits (Input Current per Phase of Equipment ≤ 16A), GB 17743-2007 "Limits and Measurement Methods for Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment," and the current effective corporate standards and product express quality requirements for the interchangeability of self-ballasted LED lamp products. Accidental contact with live parts Protection, insulation resistance and dielectric strength after moisture treatment, mechanical strength, lamp temperature rise, heat resistance, fire and flame resistance, fault conditions, lamp power, power factor, initial luminous efficiency / luminous flux, general Fifteen items such as color rendering index, color product tolerance, harmonics, and disturbance voltage were examined.
After inspection, 17 batches of products do not meet the requirements of the standard, involving protection against accidental contact with live parts, insulation resistance and dielectric strength, mechanical strength, failure status, color product tolerance, general color rendering index, and disturbance voltage after moisture treatment. , Lamp Power, Heat Resistance, Interchangeability, Power Factor, Initial Luminous Efficiency/Luminous Flux, Fire Protection and Flame Retardance. Spot checks found that 11 out of 17 batches of unqualified products were manufactured by “Zhongshan City,†and the nominal production companies involved Zhongshan Knightsen Lighting Technology Co., Ltd., Zhongshan Huakai Lighting Co., Ltd., and Zhongshan City Yaoneng Lighting. Technology Co., Ltd., Zhongshan Zhujiang Lighting Appliance Co., Ltd., Zhongshan Puglia Lighting Lighting Co., Ltd., Zhongshan Jinye Lighting Co., Ltd., Zhongshan Guzhen Junyang Optoelectronic Lighting Factory, Zhongshan Guoyu Lighting Co., Ltd. and other enterprises.
Guangdong Provincial Quality and Technical Supervision stated that it has instructed the relevant departments to deal with unqualified products and their manufacturing enterprises in this special supervision and spot check in accordance with relevant laws and regulations.
The Bureau reminds consumers that when buying LED lights, you must check the product's logo. The specification of the product packaging usually describes the luminous flux, beam angle, lifetime, color temperature, and correct installation position of the LED lamp. After opening the package, there must be some necessary signs on the self-ballasted LED lights themselves, mainly including: power supply voltage, frequency, rated power, name and trademark of the manufacturer. Also check whether there is a “CQC†or “Energy Conservation Certification†logo on the packaging. If the company obtains the “CQC†or “Energy Conservation Certification†logo, it proves that the company's product quality is one level higher than that of the generally qualified product.
It is reported that the Guangdong Provincial Bureau of Quality and Technical Supervision announced on August 21 the results of special provincial supervision and inspection of self-ballasted LED lamp product quality. The discovery rate of substandard products was 73.9%.
A total of 23 batches of self-ballasted LED lamp products produced by 21 companies in 7 cities including Guangzhou, Shenzhen, Zhuhai, Foshan, Zhongshan, Huizhou and Dongguan were investigated. According to GB24906-2010, 50V or more for ordinary lighting Safety Requirements for Flow LED Lamps, GB/T24908-2010 Performance Requirements for Self-ballasted LED Lamps for General Lighting, and GB17625.1-2003 Electromagnetic Compatibility Limits and Harmonic Current Emission Limits (Input Current per Phase of Equipment ≤ 16A), GB 17743-2007 "Limits and Measurement Methods for Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment," and the current effective corporate standards and product express quality requirements for the interchangeability of self-ballasted LED lamp products. Accidental contact with live parts Protection, insulation resistance and dielectric strength after moisture treatment, mechanical strength, lamp temperature rise, heat resistance, fire and flame resistance, fault conditions, lamp power, power factor, initial luminous efficiency / luminous flux, general Fifteen items such as color rendering index, color product tolerance, harmonics, and disturbance voltage were examined.
After inspection, 17 batches of products do not meet the requirements of the standard, involving protection against accidental contact with live parts, insulation resistance and dielectric strength, mechanical strength, failure status, color product tolerance, general color rendering index, and disturbance voltage after moisture treatment. , Lamp Power, Heat Resistance, Interchangeability, Power Factor, Initial Luminous Efficiency/Luminous Flux, Fire Protection and Flame Retardance. Spot checks found that 11 out of 17 batches of unqualified products were manufactured by “Zhongshan City,†and the nominal production companies involved Zhongshan Knightsen Lighting Technology Co., Ltd., Zhongshan Huakai Lighting Co., Ltd., and Zhongshan City Yaoneng Lighting. Technology Co., Ltd., Zhongshan Zhujiang Lighting Appliance Co., Ltd., Zhongshan Puglia Lighting Lighting Co., Ltd., Zhongshan Jinye Lighting Co., Ltd., Zhongshan Guzhen Junyang Optoelectronic Lighting Factory, Zhongshan Guoyu Lighting Co., Ltd. and other enterprises.
Guangdong Provincial Quality and Technical Supervision stated that it has instructed the relevant departments to deal with unqualified products and their manufacturing enterprises in this special supervision and spot check in accordance with relevant laws and regulations.
Stainless Steel Tube Mini-Cable
Mini Cable,Stainless Steel Tube Mini-Cable,Parallel Steel Wires,Water-Blocking Fiber Jelly
Shandong Qingguo Optical Fiber Co., Ltd. , https://www.qgfiber.com