Sanyo and Sony Ericsson's popularity in China's 3C industry is not low, Sanyo washing machines and other home appliances have always been in the minds of consumers, and Sony Ericsson has been classified by many consumers as today. One of the first-line mobile phone brands. But these are two brands that make Chinese people think they should not disappear. They are about to disappear.
In the micro survey of the Nanfang Daily 3C Weekly, 70% of netizens believe that the loss of Sanyo and Sony Ericsson brands is the biggest reason to lose in the market competition. According to statistics, the brand change of Sony Ericsson is mainly from the change of equity. The joint venture company Sony Ericsson was established in 2001, and Sony and Ericsson each hold 50% of the shares. At the end of October this year, Sony announced plans to acquire 50% of the shares held by Ericsson. Sony will pay Ericsson about US$1.5 billion, after which Sony’s smartphones use Sony’s trademark. The Sanyo brand problem is even more complicated. As the first Japanese company to enter China after the reform and opening up, Sanyo has established 43 joint ventures in China. Its electromechanical products, Eneloop batteries, and small household electrical appliances are deeply rooted in China, but from After Sanyo Electric was acquired by Matsushita in 2008, the combination of the two sides in many areas (such as clean energy) has been very harmonious, but because of fierce market competition, it is difficult for Matsushita to continue to maintain the Sanyo brand because of operating costs. In fact, in early September of this year, Sanyo Electric made a new round of layoffs in Japan, and the number of employees in some departments was close to 20%.
From this, it can be seen that there is a direct relationship between the brand's development and the fact that the company has not become bigger and stronger. In the Nanfang Daily's 3C weekly micro survey, 20% of users believe that the decline of these two brands is due to the lack of a brand. Vitality, and only 10% of netizens think it is due to “self-operating problemsâ€.
High-TG PCB
The glass transition temperature of a Printed Circuit Board, referred to as "Tg ", indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.
BentePCB are manufactured with materials offering a TG value of 140C, which can withstand an operating temperate of 110C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 material can often provide the best solution.
What Is FR-4?
FR-4 is a grade designation for flame-retardant fiberglass reinforced epoxy material. Thus, an FR-4 circuit board offers a much greater level of resistance to heat than a Standard PCB. FR-4 circuit boards are divided into four classifications that are determined by the number of copper trace layers found in the material:
· • Single-sided
· • Double-sided
· • Four, six or 10 layers
· • More than 10 layers
Providing the Right High-Temperature PCB for Your Applications
BentePCB offers a wide selection of high-temperature PCB products manufacturing services either with FR-4 or other high-quality heat- and temperature-resistant Tg materials. We are able to perform high-temperature PCB fabrication for automotive, industry and high-temperature electronics applications. We can manufacture High-Tg PCBs with a Tg value of up to 180°C. Following table lists some of our commonly used materials for High-Tg PCBs production.
|
Material |
TG |
Td |
CTE-z |
Td260 |
Td288 |
|
S1141 (FR4) |
175 |
300 |
55 |
8 |
/ |
|
S1000-2M (FR4) |
180 |
345 |
45 |
60 |
20 |
|
IT180 |
180 |
345 |
45 |
60 |
20 |
|
Rogers 4350B |
280 |
390 |
50 |
/ |
|
About Us:
BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.
Why Us?
UL (E492586), ISO9001, ISO14001, TS16949, RoHS certified.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.
Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):
Factory Tour:
Exhibition:
We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.
Delivery:
BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
FAQ:
Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry toour customer service representatives, Your satisfaction is our pursuits.
We don`t just sell PCBs .We sell sleep.
High Tg PCB, LED Light Board, High Tg FR4 PCB, High Tg Circuit Board
Shenzhen Bente Circuit Limited , http://www.bentegroup.com