How should we set up digital TV remote controls in our lives? How to make the digital TV remote control a real remote control that brings us convenient life? Here are some ways and tricks to set up a digital TV remote control, which simplifies our steps to turn off the TV. The following Xiao Bian gave you an introduction!
Digital TV remote control setting method and steps:
In fact, the digital television set-top box remote controller has a set of learning function function keys. It is the key to let us realize the remote control TV. The following is how to set the “Power†switch of the remote control TV for digital TV remote control:
1. With the remote control of the set-top box in one hand and the TV remote control in one hand, let the infrared emitters of the two remote controls face each other.
2. Press and hold the set button on the remote control of the set-top box for 10 seconds to make it light up, indicating that the red light is on and it is in the steady light state. After that, the TV remote controller is aimed at the red receiver of the remote controller on the learning set top box.
3. Press the “Power†button on the remote control of the TV again. At this time, you will see the set-top box remote indicator flashing. This indicates that the set-top box remote controller received the “Power†command signal data on the TV remote control. Then press the "Power" button on the set top box remote control TV function area. At this moment, the flashing light on the set top box remote control will stop flashing.
Then press the "Settings" button on the remote control of the set-top box, and the light flashing on the remote control of the set-top box will go out. Here we have completely set up the TV set button remote control on the remote control set up work, you immediately try the set-top box remote control TV function area "power" switch key, watching the TV is not for you to turn off!
Digital TV remote control setting method and steps (learning key):
1. Let's press and hold the “SET†setting button on the remote control for about 2 seconds. When the red indicator light shows a long bright state, release the “SET†button. At this time, the remote control will At the time of learning to stand by.
2. When the remote controller is on standby, we can select the key to be learned within 10 seconds. At this time, we must pay attention to the fact that the key we choose to learn can only select the TV in the TV area. â€, “Volume +-†“Menu†and 13 keys. After selecting the learning key, the red indicator light of the remote controller will start flashing promptly, and the remote controller will enter the receiving learning state.
3, we put the need to learn the TV remote control in front of another remote control, press the TV remote control "TV" button for about 3 seconds to send out the learning signal, once the learning signal is received, remote control The red indicator of the unit flashes three times quickly and then lights up. Repeat steps 2 and 3 afterwards.
4. You can press steps 2 and 3 and then learn the other 12 buttons. After learning any key, press “SET†to exit the learning state.
5. After successful learning, aim the learning remote at the TV and press the “TV†key just learned, you can normally control the TV remotely; the red light flashes. Our setup is complete. Isn't it simple?
to sum up:
Several other keys of the television functional area of ​​the digital television set-top box remote controller can be set one by one by the above-mentioned method. After setting up the digital TV remote control, let us watch TV more peace of mind and intimate.
In fact, the digital television set-top box remote controller has a set of learning function function keys. It is the key to let us realize the remote control TV. The following is how to set the “Power†switch of the remote control TV for digital TV remote control:
1. With the remote control of the set-top box in one hand and the TV remote control in one hand, let the infrared emitters of the two remote controls face each other.
2. Press and hold the set button on the remote control of the set-top box for 10 seconds to make it light up, indicating that the red light is on and it is in the steady light state. After that, the TV remote controller is aimed at the red receiver of the remote controller on the learning set top box.
3. Press the “Power†button on the remote control of the TV again. At this time, you will see the set-top box remote indicator flashing. This indicates that the set-top box remote controller received the “Power†command signal data on the TV remote control. Then press the "Power" button on the set top box remote control TV function area. At this moment, the flashing light on the set top box remote control will stop flashing.
Then press the "Settings" button on the remote control of the set-top box, and the light flashing on the remote control of the set-top box will go out. Here we have completely set up the TV set button remote control on the remote control set up work, you immediately try the set-top box remote control TV function area "power" switch key, watching the TV is not for you to turn off!
1. Let's press and hold the “SET†setting button on the remote control for about 2 seconds. When the red indicator light shows a long bright state, release the “SET†button. At this time, the remote control will At the time of learning to stand by.
2. When the remote controller is on standby, we can select the key to be learned within 10 seconds. At this time, we must pay attention to the fact that the key we choose to learn can only select the TV in the TV area. â€, “Volume +-†“Menu†and 13 keys. After selecting the learning key, the red indicator light of the remote controller will start flashing promptly, and the remote controller will enter the receiving learning state.
3, we put the need to learn the TV remote control in front of another remote control, press the TV remote control "TV" button for about 3 seconds to send out the learning signal, once the learning signal is received, remote control The red indicator of the unit flashes three times quickly and then lights up. Repeat steps 2 and 3 afterwards.
4. You can press steps 2 and 3 and then learn the other 12 buttons. After learning any key, press “SET†to exit the learning state.
5. After successful learning, aim the learning remote at the TV and press the “TV†key just learned, you can normally control the TV remotely; the red light flashes. Our setup is complete. Isn't it simple?
to sum up:
Several other keys of the television functional area of ​​the digital television set-top box remote controller can be set one by one by the above-mentioned method. After setting up the digital TV remote control, let us watch TV more peace of mind and intimate.
Front Terminal Lead Acid Battery
Front End Terminal Battery,High Performance Battery,Fit 23-Inch Rack Battery,Fit 19-Inch Cabinet Battery
Wolong Electric Group Zhejiang Dengta Power Source Co.,Ltd , https://www.wldtbattery.com